K&N 69-6000TR Typhoon Cold Air Intake Kit For Mazda Miata / MX-5 1.8L
Part # 69-6000TR SKU 8045
Write a Review
K&N Engineering
K&N 69-6000TR Typhoon Cold Air Intake Kit For Mazda Miata / MX-5 1.8L
Highlights
- Air filter color
- Red (pre-oiled)
- Air filter diameter (base/top)
- 6 in (152 mm) / 5 in (127 mm)
- Air filter height
- 6.5 in (165 mm)
- Air filter material
- Cotton Gauze
- Air filter shape
- Conical, X-Stream Top
- Carb eo number
- D-269-37
- Clamps included
- 5 (stainless steel, worm gear)
- Color
- Black, Red
- EPA status
- Compliant
- Heat shield
- Not included (open filter design)
- Horsepower gain
- +3.58 HP @ 6499 RPM
- Intake pipe finish
- Red Powder-Coated
- Material
- Aluminum
- Prop 65 warning
- Warning applies
- Replacement filter
- RU-4870
- System type
- Short Ram Intake
- Torque gain
- +3 lb-ft
- Type
- Engine Cold Air Intake Performance Kit
- Vehicle fitment
- Mazda Miata / MX-5 (check year/engine before purchase)
Description
K&N 69-6000TR Typhoon Cold Air Intake Kit For Mazda Miata / MX-5 1.8L
The K&N 69-6000TR Typhoon Cold Air Intake Kit is specifically designed for the Mazda Miata and MX-5 equipped with a 1.8L engine. This performance-enhancing intake system maximizes airflow to improve your vehicle's overall performance. By replacing the restrictive factory air intake system, the Typhoon kit allows for greater air volume and velocity, contributing to improved engine efficiency and throttle response.
Its innovative design features a high-flow air filter that captures more dirt and debris than typical filters while maintaining optimal air intake. This not only enhances performance but also extends the service intervals before filter replacement is required. The aluminum intake tubing further supports performance by reducing turbulence, promoting smooth airflow directly into the engine.
Installation of the K&N Typhoon Cold Air Intake Kit is straightforward, utilizing the existing mounting points and hardware in your vehicle. The kit comes with all necessary components, ensuring a hassle-free installation process for both seasoned enthusiasts and novices alike.
FITMENT:
This cold air intake kit is compatible with the Mazda Miata and MX-5 models that feature a 1.8L engine, specifically tailored to improve performance in these vehicles.
Key Features & Benefits
- High-flow air filter designed for improved airflow and filtration efficiency.
- Aluminum intake tubing reduces air turbulence for enhanced throttle response.
- Simple installation process with included hardware for a direct fit.
- Engineered to increase horsepower and torque, optimizing engine performance.
- Washable and reusable air filter provides long-lasting performance and cost-effectiveness.
Vehicle fitment
| Make | Model | Submodel | Years |
|---|
No vehicle matches that filter.
Fitment data from the manufacturer catalogue. Check your engine before ordering, or call us.
Specifications
| Identification | |
|---|---|
| Brand | K&N Engineering |
| Part number | 69-6000TR |
| SKU | 8045 |
| UPC | 024844092830 |
| Dimensions and weight | |
| Dimensions (W × H × D) | 14.00 × 18.00 × 9.00 in |
| Material and finish | |
| Color | Black, Red |
| Material | Aluminum |
| Series and warranty | |
| Series | Typhoon Performance Intake System |
| Details | |
| Air filter color | Red (pre-oiled) |
| Air filter diameter (base/top) | 6 in (152 mm) / 5 in (127 mm) |
| Air filter height | 6.5 in (165 mm) |
| Air filter material | Cotton Gauze |
| Air filter shape | Conical, X-Stream Top |
| Carb eo number | D-269-37 |
| Clamps included | 5 (stainless steel, worm gear) |
| EPA status | Compliant |
| Heat shield | Not included (open filter design) |
| Horsepower gain | +3.58 HP @ 6499 RPM |
| Intake pipe finish | Red Powder-Coated |
| Prop 65 warning | Warning applies |
| Replacement filter | RU-4870 |
| System type | Short Ram Intake |
| Torque gain | +3 lb-ft |
| Type | Engine Cold Air Intake Performance Kit |
| Vehicle fitment | Mazda Miata / MX-5 (check year/engine before purchase) |
Shipping and returns
Shipping. Free on every order, US only. Orders arrive in 2–4 days.
Returns. 30-day returns, except in extreme cases.
Support. Our team is available 24/7 for fitment mismatches or any other reason.
Warranty. Full manufacturer guarantee.
Not sure about this part? Ask us.
Fitment, install, what else you need for the job. A parts person answers, usually within one business day.
We answer by email. No account needed.
Questions and answers
No public questions on this part yet. Ask the first one.
Reviews
Write a reviewNo reviews on this part yet.
-
K&N Engineering
K&N 69-5302TTK Typhoon Cold Air Intake Kit For Hyundai Genesis 2.0L Turbo
$419.99 -
K&N Engineering
K&N 69-9000TS Typhoon Cold Air Intake Kit For Volvo S40 & C30 20042012
$419.99 -
K&N Engineering
K&N 69-2023TS Typhoon Cold Air Intake Kit For Mini Cooper S 1.6L 20022006
$367.99 -
K&N Engineering
K&N 69-2528TTK Typhoon Cold Air Intake Kit For Dodge Viper 8.4L V10 201316
$629.99 -
K&N Engineering
K&N 69-3530TS Typhoon Cold Air Intake Kit For Ford Fiesta 1.6L 2011-2016
$419.99