K&N Blackhawk 71-9042 Cold Air Intake For 2022-2026 Toyota Tundra 3.5L V6
Part # 71-9042 SKU 582654
Write a Review
K&N Engineering
K&N Blackhawk 71-9042 Cold Air Intake For 2022-2026 Toyota Tundra 3.5L V6
Highlights
- MPN
- knn71-9042
- Air box / heat shield
- Yes (steel heat shield included)
- Air filter material
- Non-woven Synthetic (oil-free)
- CARB status
- Not CARB approved
- Clamps included
- 9 (carbon steel, black finish)
- Couplers included
- 2 (black)
- Gasket material
- Rubber
- Horsepower gain
- +17 HP @ 5000 RPM
- Labels & certifications
- 50 State Legal
- Mass air flow sensor adapter
- Included when required
- Material
- Aluminum
- Mounting style
- Bolt-On
- Oil included
- No (dry filter system)
- Position
- Front
- Prop 65 warning
- Warning applies
- Replacement filter
- RU-3135HBK
- Torque gain
- +18 lb-ft
- Type
- Engine Cold Air Intake Performance Kit
- Interchange number
- Fits 2022-2025 Toyota Tundra & 2023-2025 Toyota Sequoia (SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, Capstone - V6 3.4L).
Description
The K&N 71-9042 Blackhawk Performance Air Intake System is designed for select Toyota Tundra and Toyota Sequoia applications equipped with the 3445cc V6 engine. The system uses black aluminum intake tubing with a washable black non-woven synthetic air filter and is designed to replace the applicable factory intake components in supported applications.
Published performance data lists an estimated gain of 17 horsepower at 5,000 RPM and 18 lb-ft of torque. Actual results may vary based on vehicle condition, configuration, testing method and environmental conditions.
Vehicle Fitment
Toyota Tundra 3445cc V6: 2022-2026 1794 Edition, Capstone, Limited, Platinum, SR, SR5 and TRD Pro.
Toyota Sequoia 3445cc V6: 2023-2026 Capstone, Limited, Platinum, SR5 and TRD Pro; 2025-2026 1794 Edition. Verify exact year, trim and engine before ordering.
Key Features & Benefits
- 71 Series Blackhawk performance air intake system
- Designed for select Toyota Tundra and Sequoia V6 applications
- Published estimated gain of 17 HP at 5,000 RPM
- Published estimated torque gain of 18 lb-ft
- Black aluminum intake tubing
- Black non-woven synthetic air filter
- Washable air filter design
- Round filter outlet
- Mass air flow sensor adapter included
- All required intake-tube ports for specified applications included
- Mounting hardware included
- 9 black carbon-steel worm-gear clamps included
- 2 black couplers included
- No filter oil required
Technical Specifications
| Brand | K&N |
| Part Number / MPN | 71-9042 |
| Product Style | 71 Series Kit |
| Intake Pipe Material | Aluminum |
| Intake Pipe Finish | Black |
| Air Filter Material | Non-Woven Synthetic |
| Air Filter Color | Black |
| Air Filter Shape | Round Outlet |
| Washable Filter | Yes |
| Oil Included | No |
| Replacement Filter | RU-3135HBK |
| Estimated Horsepower Gain | 17 HP @ 5,000 RPM |
| Estimated Torque Gain | 18 lb-ft |
| MAF Sensor Adapter Included | Yes |
| Clamps Included | 9 |
| Couplers Included | 2 |
| Mounting Hardware Included | Yes |
| Air Box Included | No |
| Weight | 18 lb (8.2 kg) |
| Warranty | No-Hassle Lifetime Limited |
Installation & Maintenance
The system includes the required intake-tube ports, mass air flow sensor adapter, mounting hardware, clamps and couplers for the specified applications. Installation requirements can vary by vehicle, so follow the current K&N instructions for part number 71-9042.
The supplied synthetic air filter is washable and does not require filter oil. Use the correct K&N service procedure for the RU-3135HBK replacement filter when maintenance is required.
California & Emissions Warning
Not legal for sale or use in California on any pollution-controlled motor vehicle. The supplied application data also identifies these fitments as not California Air Resources Board exempt. Verify all applicable state and local regulations before ordering or installation.
California Proposition 65 Warning
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Important Notes
- Fitment includes both Toyota Tundra and Toyota Sequoia applications.
- Detailed fitment data identifies the engine as 3445cc V6, approximately 3.4L.
- Published horsepower and torque figures are estimates; actual results may vary.
- Verify exact year, trim, engine and intake configuration before ordering.
Fits
2022-2026 Toyota Tundra, 2023-2026 Toyota Sequoia
Fitment data from the manufacturer catalogue. Check your engine before ordering, or call us.
Vehicle fitment
| Make | Model | Submodel | Years |
|---|
No vehicle matches that filter.
Fitment data from the manufacturer catalogue. Check your engine before ordering, or call us.
Specifications
| Identification | |
|---|---|
| Brand | K&N Engineering |
| Part number | 71-9042 |
| SKU | 582654 |
| UPC | 024844400574 |
| Dimensions and weight | |
| Dimensions (W × H × D) | 20.00 × 24.00 × 16.00 in |
| Material and finish | |
| Finish | Black Powder-Coated |
| Material | Aluminum |
| Series and warranty | |
| Series | Blackhawk Induction Kit (71 Series) |
| Details | |
| MPN | knn71-9042 |
| Air box / heat shield | Yes (steel heat shield included) |
| Air filter material | Non-woven Synthetic (oil-free) |
| CARB status | Not CARB approved |
| Clamps included | 9 (carbon steel, black finish) |
| Couplers included | 2 (black) |
| Gasket material | Rubber |
| Horsepower gain | +17 HP @ 5000 RPM |
| Includes | Intake Tube, Air Filter |
| Labels & certifications | 50 State Legal |
| Mass air flow sensor adapter | Included when required |
| Mounting style | Bolt-On |
| Oil included | No (dry filter system) |
| Position | Front |
| Prop 65 warning | Warning applies |
| Replacement filter | RU-3135HBK |
| Torque gain | +18 lb-ft |
| Type | Engine Cold Air Intake Performance Kit |
| Interchange number | Fits 2022-2025 Toyota Tundra & 2023-2025 Toyota Sequoia (SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, Capstone - V6 3.4L). |
Shipping and returns
Shipping. Free on every order, US only. Orders arrive in 2–4 days.
Returns. 30-day returns, except in extreme cases.
Support. Our team is available 24/7 for fitment mismatches or any other reason.
Warranty. Full manufacturer guarantee.
Not sure about this part? Ask us.
Fitment, install, what else you need for the job. A parts person answers, usually within one business day.
We answer by email. No account needed.
Questions and answers
No public questions on this part yet. Ask the first one.
Reviews
Write a reviewNo reviews on this part yet.
-
K&N Engineering
K&N 69-8610TTK Typhoon Cold Air Intake For Toyota 3.5L V6 2007-2009
$419.99 -
K&N Engineering
For K&N 2016-2020 Toyota Tacoma 3.5L V6 Cold Air IntaKe Kit Fits V6 Models
$472.99 -
K&N Engineering
K&N 69-8611TS Cold Air Intake Kit For Toyota Camry V6 3.5L Performance
$419.99 -
K&N Engineering
K&N 71-3527 Blackhawk Cold Air Intake Kit For Ford Mustang 20112014
$419.99 -
K&N Engineering
K&N 71-2545 Blackhawk Cold Air Intake Kit For Dodge Charger Challenger
$524.99