MBRP Armor Lite Cat-Back Exhaust For Ford Mustang 2.3L EcoBoost 2015-2026
Part # S7275AL SKU 4370086
Highlights
- MPN
- mbrpS7275AL
- Shape
- Round Angle
- Pipe material
- Aluminized Steel
- Position
- Rear
- Exit position
- Dual Split Rear
- Muffler count
- 2
- Mounting style
- Clamp-On
- Outlet diameter
- 4 in
- Color
- Silver
- Material
- Steel
- Muffler quantity
- 2
- Type
- Cat Back Exhaust Kit
- Major
- Muscle Car
- Interchange number
- 2015-2026 Ford Mustang EcoBoost EcoBoost Premium L4 2.3L Cat Back, Exhaust System
- Piping
- 3in
- Inlet inside diameter
- 3
- Minor
- Minor
- Exhaust type
- Cat-Back
- Tail pipe diameter
- 3 in.
Description
Key facts
- Part number: S7275AL
- Heavy Duty Aluminized Steel, Fully Sealed Tubing for Rust Resistance. Aggressive Exhaust Tone. Bolt-on Installation. Increased Horsepower and Flow. MBRP Signature Styling and Sound.
- Stainless Steel Tips Are Included
- Improved Torque And Horsepower
- Lower Exhaust Gas Temperatures
- Increased Throttle Response
- Utilizes OEM Hangers
The MBRP S7275AL Armor Lite Cat-Back Exhaust System is designed for select 2015-2026 Ford Mustang EcoBoost models equipped with the 2.3L turbocharged gasoline engine and a non-active exhaust system. This Race Profile system uses 3-inch aluminized-steel piping with a dual split rear exit and two 4.5-inch polished stainless-steel exhaust tips.
The system features two straight-through mufflers and is designed to improve exhaust flow over the factory system. Published performance data lists gains of up to 17 horsepower and 17 lb-ft of torque. The system uses a bolt-on configuration with included clamps and hangers, although pipe modifications may be required on convertible applications.
Vehicle Fitment
Ford Mustang EcoBoost 2.3L: 2015-2026 models with non-active exhaust systems.
Fitment Note: Pipe modifications may be required on convertible models. Verify exact year, trim, body style and exhaust configuration before ordering.
Key Features & Benefits
- Armor Lite cat-back exhaust system
- Designed for select 2015-2026 Ford Mustang EcoBoost 2.3L applications
- For non-active exhaust models only
- Race Profile exhaust configuration
- 3-inch aluminized-steel exhaust piping
- Dual split rear exit
- Two straight-through mufflers
- Dual 4.5-inch polished stainless-steel exhaust tips
- Manufacturer-published gains of up to 17 HP and 17 lb-ft of torque
- Bolt-on design with clamps and hangers included
- No cutting required for standard applications
Technical Specifications
| Brand | MBRP |
| Part Number / MPN | S7275AL |
| Series | Armor Lite |
| Exhaust Type | Cat-Back |
| Profile | Race Profile |
| Main Piping Diameter | 3 in |
| Pipe Material | Aluminized Steel |
| Finish | Satin |
| Exit Style | Dual Split Rear |
| Muffler Type | Straight-Through |
| Muffler Quantity | 2 |
| Tip Diameter | 4.5 in |
| Tip Material | Stainless Steel |
| Tip Finish | Polished |
| Tip Quantity | 2 |
| Estimated Horsepower Increase | 17 HP |
| Estimated Torque Increase | 17 lb-ft |
| Bolt-On | Yes |
| Clamps Included | Yes |
| Hangers Included | Yes |
Installation
The system uses a bolt-on installation with round-band clamps and included hangers. Standard applications are listed as requiring no cutting. Convertible models may require pipe modifications during installation.
Race Use Warning
This exhaust system is intended for race use only. Verify all applicable federal, state and local laws and regulations before purchase, installation or use.
California Proposition 65 Warning
WARNING: This product can expose you to chemicals including nickel (metallic) and chromium (hexavalent compounds), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.
Important Notes
- For non-active exhaust models only.
- Pipe modifications may be required on convertible applications.
- This product is intended for race use only.
- Horsepower and torque figures are manufacturer-published estimates. Actual results may vary based on vehicle condition, modifications, fuel, environmental conditions and testing methods.
Fits
2015-2026 Ford Mustang
Fitment data from the manufacturer catalogue. Check your engine before ordering, or call us.
Vehicle fitment
| Make | Model | Submodel | Years |
|---|
No vehicle matches that filter.
Fitment data from the manufacturer catalogue. Check your engine before ordering, or call us.
Specifications
| Identification | |
|---|---|
| Brand | MBRP |
| Part number | S7275AL |
| SKU | 4370086 |
| UPC | 882963121776 |
| Dimensions and weight | |
| Dimensions (W × H × D) | 17.00 × 47.00 × 16.00 in |
| Material and finish | |
| Color | Silver |
| Material | Steel |
| Series and warranty | |
| Details | |
| MPN | mbrpS7275AL |
| Shape | Round Angle |
| Includes | Tip |
| Pipe material | Aluminized Steel |
| Position | Rear |
| Exit position | Dual Split Rear |
| Muffler count | 2 |
| Mounting style | Clamp-On |
| Outlet diameter | 4 in |
| Muffler quantity | 2 |
| Type | Cat Back Exhaust Kit |
| Major | Muscle Car |
| Interchange number | 2015-2026 Ford Mustang EcoBoost EcoBoost Premium L4 2.3L Cat Back, Exhaust System |
| Piping | 3in |
| Inlet inside diameter | 3 |
| Minor | Minor |
| Exhaust type | Cat-Back |
| Tail pipe diameter | 3 in. |
Shipping and returns
Shipping. Free on every order, US only. Orders arrive in 2–4 days.
Returns. 60-day free returns, except in extreme cases.
Support. Our team is available 24/7 for fitment mismatches or any other reason.
Warranty. Full manufacturer guarantee.
Not sure about this part? Ask us.
Fitment, install, what else you need for the job. A parts person answers, usually within one business day.
We answer by email. No account needed.
Questions and answers
No public questions on this part yet. Ask the first one.
Reviews
Write a reviewNo reviews on this part yet.